Epoxy Floor Coatings
Flake/Chip Epoxy Floor Coating
Epoxy done the right way is difficult to apply and needs the concrete surface to be properly prepared with a diamond blade grind prior to installation. Epoxy with flakes added is typically favored for those that want to keep the surface more slip-resistant when wet. Many different color options for base epoxy as well as the flake (vinyl chips). Our epoxy's are 100% solids and are sealed with a polyaspartic top coat, resulting in a very attractive and durable finish.
Metallic Epoxy Floor Coating
Epoxy done the right way is difficult to apply and needs the concrete surface to be properly prepared with a diamond blade grind prior to installation. With metallic epoxy, each project turns out completely different & unique. No two projects look the same. Color options can get fun & creative. A quick chat will help us understand the look you are after! Our epoxy's are 100% solids and are sealed with a polyaspartic top coat, resulting in a very aesthetically beautiful and durable finish.
Our Recommendations For Proper Care/Maintenence
- Do not walk on floor between coats (after base is applied and before clear is applied).
- Do not walk on for 24 hours (1 day) after clear/seal coat is finished.
- Do not move in heavier items (>50lbs) for 72 hours (3 days) after clear/seal coat is finished.
- Do not drive on for 120 hours (5 days) after clear/seal coat is finished.
- Do not power wash for 30 days.
- Hosing off floor & lightly power washing is best way to clean.
- Only chemical substance OK for cleaning : Simple Green.
- Water down simple green in bucket.
- Apply to floor and hit with light brush.
- Hose out / clean off.
